View LC503NPP1-20H-A3_1263477.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) 5-mm Round LED
Model # LC503NPP-20H-A3 Data Sheet
20-degree, 5-mm round LED lamp in full color with water-transparent lens and no stopper
Applications
* * * * Office Equipment Communications Equipment Measurement Equipment Household Appliances
Absolute Maximum Ratings (TA = 25C)
Absolute Maximum Rating Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature
Note
Symbol IF IFP VR PD Topr Tstg Tsol
R 50 200 5 125
G 25 100 5 100 -40 ~ +95 -40 ~ +100
B 25 100 5 100
Unit mA mA V mW C C
Max. 260C for 3 sec. max. (3 mm from the base of the epoxy bulb)
Note: Pulse width 0.1 msec, duty 1/10.
Typical Electrical & Optical Characteristics (TA = 25C)
Values Characteristics Condition Symbol VF(avg) VF(max) IR(max) D(min) Dominant Wavelength IF = 20 mA D(typ) D(max) Luminous Intensity 50% Power Angle IF = 20 mA IF = 20 mA IV 21/2 R 2.0 2.5 100 620 624 628 770~4180 20 G 3.4 4.0 100 520 527 540 550~4180 20 B 3.4 4.0 100 465 470 480 200~1100 20 Unit V V A nm nm nm mcd C
Forward Voltage Reverse Current
IF = 20 mA VR = 5 V
D-CT093.000 Data Sheet: CL
Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is 15%. 4. Tolerance of measurement of dominant wavelength is 1 nm. 5. Tolerance of measurement of VF is 0.05 V. 6. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 7. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 8. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely.
Subject to change without notice. www.cree.com/ledlamps
Graphs
Document No. SPE/LC503NPP1-20H-A3 Rev. No. 04
Graphs
Items Prepared by Checked by Approved by FCN#
Signatures
LiuZM Aldosin David
Date
2006-12-22 2006-12-22 2006-12-22 Rev. No 02 03 04 Date
Revision History
Change Description
to 480nm, Change D(max) of green from 535 to 540nm.
IV(G) from 550~3000mcd to 550~4180mcd, IV(B) from 200~770mcd to 200~1100mcd.
2006-08-29 Change CIE to IV range; Change D(max) of blue from 475 2006-12-06 Release. Change IV(R) from 770~3000 to 770~4180mcd, 2006-12-22 Correct: add Important Notes.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
FCN20060423
Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco All rights reserved. The information in this document is subject to change without notice. Cree and the International Ltd. Copyright (c) 2007 Cree, Inc.
Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT093.000
3/3
Format #: COTCO-D-074
REV.4
Mechanical Dimensions
All dimensions are in mm. Tolerance is 0.25Rev.unless otherwise noted. mm No. 04 An epoxy meniscus may extend about 1.5 mm down the leads.
Document No. SPE/LC503NPP1-20H-A3
Dimensiomax. Burr around bottom of epoxy may be 0.5 mm n Draw ing
Dimension Drawing
25C bsolute maximum Rating G 25 0 5 100 5 100 -40 ~ +95 -40 ~ +100 B 25 100 5 100 mA mA V mW Unit
C C
Max.260C for 3 sec Max.
RoHS Compliance
Notes from the base of the epoxy bulb)
The ( Ta of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or teristics levels = 25C)
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU DirecValues tive ondition 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment Symbol through April 21, 2006. Unit (RoHS), as amended
R
G
B
2.0 3.4 3.4 V F(avg) IF=20mA should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Users VF(max) 2.5 4.0 4.0 V VR=5V IR(max) 100 100 100 A
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Vision Advisory Claim V
620 520 465 Copyright (c) 2007D(min) All rights reserved. The information in this document is subject to change without notice. Cree and nm Cree, Inc. the
Cree logo are registered trademarks of Cree, Inc.
IF=20mA 3
CLD-CT093.000 D(typ)
624
527
470
nm
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Standard/Custom
0: Standard C: Custom
VF
0: Full forward voltage distribution 1~9, A~Z . . . : special request *
Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV
1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . :special request *
Packing type Product P/N
0: Standard = Bulk pack 1~9, A~Z . . . : special request *
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number LC503NPP1-20H-A3-00001 Description 5mm Round 20 Full Color, FULL RANK, Bulk Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
CLD-CT093.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps

▲Up To Search▲

Price & Availability of LC503NPP1-20H-A3

	To Download LC503NPP1-20H-A3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .